Toll Free no : 1800-233-1468 Email : info@amulyamica.com

Compact Laminate

Sr. No. Property Specification EN 438-3:1997 Amulya Mica’s Typical Values
1 Thickness As per requirement Within Tolerance
2 Abrasion resistance (IP+FP) IP – 150(mm)
FP – 350(mm)
225
450
3 Resistance in immersion in boiling water:% increase in mass

% increase in thickness

%(max)2mm=t<5mm  5.0%
t= 5mm 2.0%%(max) 2mm=t<5mm  6.0%
t= 5mm   2.0%
2.9%
1.125%2.6%
1.10%
4 Resistance to dry Heat@180deg Gr 4 (min) Gr.5
5 Dimensional stability @ elevated temperature
% (Max)
2mm=t<5mmT=5mm
‘L’0.30
‘T’0.65
‘L’0.20
‘T’0.56
0.25
0.43
0.15
0.40
6 Resistance to impact by large ball Drop Height (cms – Min)
Diameter of indentation (mm – Max)
150
10
150
6
7 Resistance to staining Gr. 1&2 Gr.5(Min) Gr.6&above
8 Resistance to cigarette bum Gr.3(min) Gr.4
9 Resistance to crazing Gr.4 Gr.5
10 Resistance to moisture App. Not worse than Gr. 4 Complies
11 Flexural modulus 10,000 Mpa(min) 11,000
12 Flexural strength 100 Mpa (min) 110
13 Resistance to scratching Under consideration >2N
14 Resistance to colour change (Xeno arc) Gr. 4(min) 4-6
15 Resistance to water vapour Gr. 4(min) 5
16 Tensile Strength (Mpa) 70 Mpa – Min 80